As BGR Tech, shall offer a design, manufacturing & supply of Diesel Day Tank which is used as storage tank that stores fuel for the diesel generator. It ensures that the generator has enough fuel to run for an extended period. Without a day tank, generator would have to shut down every time it ran out of fuel
Type: Rectangular / Cylindrical
MOC: CS & SS
Codes & Standards: API 620, ASME Sec.VIII Div 1, EN 12285, NFPA 110, NFPA 30
As BGR Tech, shall offer a design, manufacturing & supply of Industrial Chemical Bulk Storage Tanks which are used to store various chemicals like liquefied natural gas propane fertilisers gasoline crude oil diesel and Others similar substances. Industrial tanks have many uses besides just storing things. They can also be used for processing mixing and transporting raw materials and finished chemical products.
MOC: CS & SS, DSS, High Alloy with NACE & HIC compliance
Codes & Standards: API 620, ASME Sec.VIII Div 1, EN 12285, NFPA 110, NFPA 30
Day Tanks are made to hold all the chemicals needed for making things non-stop in one day. Day tanks are usually pressurized to help chemicals flow quickly to the pumps. The amount and type of storage tanks required depend on the type of chemicals and solvents needed to clean the system. This is a device that uses chemicals to heat up or cool down.
MOC: CS , SS
Codes & Standards: API 620, ASME Sec.VIII Div 1, EN 12285, NFPA 110, NFPA 30
As BGR Tech, shall offer a design, manufacturing & supply of Agitator Vessel / Mixer which is mixing vessel & commonly used in process engineering, An agitator is a device that mixes different substances in a tank. Media consist of different forms of substances like liquids gases and solids such as salts powders and granules. In simple terms it operates by spinning a part called an impeller to transfer energy to the substances it combines and stirs.
MOC: CS & SS, DSS, High Alloy with NACE & HIC compliance
Codes & Standards: API 620, ASME Sec.VIII Div 1
Applications: Chemical Industries, Pharmaceuticals, Personal care Products and Foods Industries.
Fuel Oil Storage Tank:
As BGR Tech, shall offer a design, manufacturing & supply of above ground Fuel Oil Storage Tank with steam coil heater which is a tank used for storing petroleum products that is placed above the ground or the floor of a building. It also includes any pipes connected to the tank.
MOC: CS & SS, DSS, High Alloy with NACE & HIC compliance
Tank Thick: to 35mm & Customized based on process and client requirements based on transportation limit.
Codes & Standards: OFS T200, BS 799-5, API 620, API650, ASME Sec.VIII Div 1
Capacity: 50 to 500000 Ltr & Customized based on process and client requirements based on transportation limit.
Applications: Processing industries, Oil & Gas industries, Chemical industries
Hot Oil Tank:
Hot oil heating also called thermal fluid heating systems is a type of heating system that indirectly heats fluids for different purposes in a closed-loop system. These systems use a special liquid that is heated in a vessel with a burner powered by electricity or gas.
Surge Tank: A surge tank is a container that stores water and helps balance the pressure in a hydropower system. It stops the pressure from getting too high or too low.
Drain Tank: A drain system that is connected directly to pressure vessels is known as a ""pressure"" or ""closed"" drain system. In the chemical process industries (CPI) there is often a need to drain a tank or process vessel. An atmospheric gravity or open drain is a system that gathers liquids that have spilled on the ground.
MOC: CS & SS, DSS, High Alloy with NACE & HIC compliance
Tank Thick: 2 to 35mm & Customized based on process and client requirements based on transportation limit.
Codes & Standards: API 620, API650, ASME Sec.VIII Div 1
Capacity: 50 to 500000 Ltr
Applications: Processing industries, Oil & Gas industries, Chemical industries
Effluent tanks are temporary tanks that hold waste. They are commonly used under portable buildings like offices showers bathrooms and food areas. Effluent tanks can also gather liquid waste and sewage at camping and glamping sites.
Volume range: 50 to 500 M^3
Diameter: 3-28 mtr & Max.Height 18mtr & Customized based on process and client requirements based on transportation limit.
MOC: Zinc Aluminium, CS & SS, DSS, High Alloy. , NACE & HIC
Applications: Industrial Waste Tanks,Effluent Tanks,Septic Tanks,Flammable liquid Tanks,Biofuel Tanks
As BGR Tech, shall offer a design, manufacturing & supply of Condensate Storage Tanks / Vessels which are an important part of heat recovery systems. They work together with Others systems to separate different phases of the condensate recover heat and monitor the quality of the condensate.
Storage Volume: Approx.0.5 to 100 m^3 & Customized based on process and client requirements based on transportation limit.
Operating Pressure: <=0.5bar for atm condensate tank & <=40bar high pressure condesate tank
Operating Temperature: <=110°C for atm condensate tank & <=250°C high pressure condesate tank
MOC: CS, SS, LTCS
Codes & Standards: ASME Sec.VIII Div1, EN 13445, AD 2000
Applications:
Air receiver is a compressed air tank & Its integral part of any compressed air system.This tank purpose is to act temporary storage tank of peaks of demand in plant requirements.
MOC: CS & SS, DSS, High Alloy. , NACE & HIC
Volume: Approx.0.5 to 50 m^3 & Customized based on process and client requirements based on transportation limit.
Pressure: 0.5 bar to 350 bar
Codes & Standards :ASME Sec.VIII Div1,EN 13445,AD 2000
Applications: All Industries,Packaging Industries,Chemical Industries,Rubber Industries,Textiles industries
It is used to store the compressed air before it enters into piping system or equipments.
MOC: CS & SS
Volume: Approx.0.5 to 50 m^3 & Customized based on process and client requirements based on transportation limit.
Pressure: 0.5 bar to 350 bar
Codes & Standards :ASME Sec.VIII Div1,EN 13445,AD 2000
Applications: All Industries,Packaging Industries,Chemical Industries,Rubber Industries,Textiles industries
It is used to store biologic,genomic,diagnostic sample in liquid N2. And it is mainly used for cryogenic services.
MOC: LTCS,CS & SS
Design Pressure: 10 to 20 bar
Storage Volume: Approx.0.5 to 50 m^3 & Customized based on process and client requirements based on transportation limit.
Codes & Standards : ASME Sec.VIII Div1,EN 13445,AD 2000
Applications: Mechanical Industries,Medical,Animal Husbandary,Preserving bull semen, Food industry, Chemical Industry, Cryogenic applications.
It can be used in inert gases like nitrogen and argon, Operating pressure upto 150 bar & Test pressure upto 300 bar.
MOC: CS & SS, DSS, High Alloy.
Codes & Standards: Approval DNV 2.7-1, EN 12709
A drain vessel is made to make increase volume of coalescing filter & housing larger so it can hold more liquid and last longer. This is necessryfor situations where a float drain cannot be used especially in negative-pressure applications.
MOC: CS & SS, DSS, High Alloy with NACE & HIC compliance
Size: Customized based on process and client requirements based on transportation limit.
Codes & Standards: ASME Sec.VIII Div1,U Stamp, API 521,PD 5500,IS 2825
Applications: Petrochemical, Steel industries,OIl & Gas
Pressurised Drain Vessel:
Basically pressure vessel is a storage tank or the vessel has be designed for operate the pressure above 15psig.
MOC: CS & SS, DSS, High Alloy with NACE & HIC compliance
Codes & Standards: ASME Sec.VIII Div 1,U Stamp, API 521, PD 5500, IS 2825, ASME U1,U2 and PED certified
Applications: Petrochemical, Steel industries, OIl & Gas
It is designed for remove or reduce the hydrogen sulfide from natural gas stream by applying solid decessicants or adsorbents. Gas sweetening process is reduce the H2S from natural gas.
Hot Drier: Industrial dryer unit, generally used for moisture remove and drying application.
Type: Pressure Swing Adsorption (PSA) / Thermal Swing Adsorption (TSA)
Capacity: Customized based on process and client requirements & based on transportation limit.
Pressure : 40 mmWG to 300 mmWG
Temperature: 60 to 200°C
MOC: CS & SS
Capacity : 12KW to 200KW
Application: Drying
Hydrogen Dryer: A hydrogen dryer is a system designed to purify hydrogen by eliminating oxygen in the hydro gen, using the palladium (Pd) catalyst and adsorbent.
MOC: CS & SS
Standards & Codes: KS(Korean Std), ASME, GOST(Russian Std), DOSH(Department of Safety and Health, Malaysia)
Applications: Semiconductor, Electronics, Fuel, Heat Treatment, Power Plants, Jet Planes
Storage tanks in various sizes and capacities for internal pressures approximating atmospheric pressure (internal pressures not exceeding the weight of the roof plates), but a higher internal pressure is permitted when additional requirements are met. This Standard applies only to tanks whose entire bottom is uniformly supported and to tanks in non-refrigerated service that have a maximum design temperature of 93°C (20QoF) or less.
Type: Shop fabricated storage tank API 650 (Dia upto 3.5m) or Field ffabricated storage tank API 650 (self supported, rafter supported, trussle supported) being used in Oil / Chemical or Water Industries.
Design Pressure : Not exceed 2.5 psi
Design Temperature: Not exceed 260°C
Size: Diameter upto 3.5m Shop fabricated
Diameter >3.5m field or site fabricated
MOC: CS, CS+RL, SS
Codes & Standards: API 650, API 620, IS: 803, AWWA D100
Applications: Storing liquid products such as Crude oil, gasoline, chemicals & water
Rectangular pressed steel tanks are used for the storage of cold and hot water and certain Others liquids under pressure not greater than the static head corresponding to the depth of the tank. It can be used in for Chemicals, DM water & Lube oil.
Capacity:Upto 3.5 m3
MOC : CS,SS
Codes & Standards: IS:804
Applications: Oil & Gas, Nuclear power plants, mining, Flow batteries and Electricity storage
Design Pressure : upto 24 bars
Design Temperature : upto -45°C
Volume: 5L Liter & Customized design based on process and client requirements
MOC: CS,SS
Design Code: ASME Sec.VIII Div.1 & 2, PD5500, EN 13445
Applications: carbonated beverages, beer making, paintball guns, medical-grade usage, metal fabrication applications, catering, and fire extinguishing
An underground storage tank system (UST) is a combination of a tank and underground piping connected to the tank that has 10 percent of its underground volume underground.
MOC: CS, SSm
Types: Aluminium or steel tanks, Composite over wrapped tanks, Thermoplastic tanks
Codes & Standards: IS:10987
Applications: Gasoline, Potable Water Source, Rainwater Harvesting, Fire Suppression and Sprinkler Reservoirs, Greywater, Underground storage tanks are used to store water in areas with a low well-water capacity or areas where groundwater quality is poor.
Launchers and Receivers are used in process pipelines to facilitate the activity of Pigging the pipeline. Pipeline Inspection Gauges or Pigs are tools that are inserted into and move through the pipeline, propelled by the flow of the fluid. Pigs perform many tasks including cleaning, inspection, coating the pipeline interior and separating batches of different fluids.
MOC: CS, SS
Codes & Standards: ASME B31.4, ASME B31.8 and ASME Section VIII Div 1
Applications: Pipeline cleaning, maintenance, repairs, isolation, inspection, testing & commissioning.